- #CHECK POINT VPN STATUS MANUAL#
- #CHECK POINT VPN STATUS SOFTWARE#
- #CHECK POINT VPN STATUS PASSWORD#
In the IPSec (Phase 2)section, from the Encryption drop-down list, select AES-256. From the Diffie-Hellman group support drop-down list, select Group 14 (2048 bit). From the Authentication drop-down list, select SHA256. In the IKE (Phase 1) section, from the Encryption drop-down list, select AES-256. From the Encryption settings drop-down list, select Custom. Click Select and select the WGINT object that you created.From the Encryption domain drop-down list, select Define remote network topology manually.
#CHECK POINT VPN STATUS PASSWORD#
In the Password and Confirm text boxes, type the password. In the Authentication section, select Pre-shared secret. Select IP address and type the public IP address of remote device in text box. From the Connection type drop-down list, select Host name or IP address. On the Remote Site tab, in the Site name text box, type the site name. From the navigation menu, select VPN > Site to Site > VPN Sites. Repeat Steps 3–8 to create another network Object, which is the internal Network IP address protected by the Check Point device. In the Object name text box, type the object name. In the Subnet mask text box, type the subnet mask. In the Network address text box, type the Network IP address, which is the internal network IP address protected by the WatchGuard Firebox. From the Type drop-down list, select Network. From the navigation menu, select Users & Objects > Network Resources > Network Objects. To configure the Check Point device, you must specify several settings. #CHECK POINT VPN STATUS MANUAL#
Keep the default values for all of the Phase 2 Settings.įor more information about Branch Office VPN configuration on the Firebox, see Configure Manual BOVPN Gateways and Configure Manual BOVPN Tunnels. This is the local network protected by the Check Point device. In the Network IP text box, type the remote IP segment. In the Remote IP section, from the Choose Type drop-down list, select Network IPv4. This is the local network protected by the Firebox. In the Network IP text box, type the local IP segment. In the Local IP section, from the Choose Type drop-down list, select Network IPv4. From the Gateway drop-down list, select the gateway that you added. The Branch Office VPN Tunnel configuration interface appears. For all other Phase 1 settings, keep the default values. From the Version drop-down list, select IKEv2. In the Gateway Endpoint section, select the Start Phase 1 tunnel when Firebox starts check box. In the adjacent text box, type the public IP address of your Check Point connection. In adjacent text box, type the primary IP address of the External Firebox interface. The Primary Interface IP Address is the primary IP address you configured on the selected external interface. From the Interface IP Address drop-down list, select Primary Interface IP Address. From the External Interface drop-down list, select External. In the Gateway Endpoint section, click Add. In the adjacent text box, type the pre-shared key. In the Credential Method section, select Use Pre-Shared Key. From the Address Family drop-down list, select IPv4 Addresses. In the Gateway Name text box, type a name to identify this Branch Office VPN gateway. The Gateway Endpoint Settings dialog box appears. The Branch Office VPN configuration page appears. On the Firebox, configure a Branch Office VPN (BOVPN) connection: This diagram shows the topology for a BOVPN connection between a Firebox and a Check Point device.
WatchGuard Firebox T55-W with Fireware v12.6.4. #CHECK POINT VPN STATUS SOFTWARE#
The hardware and software used in this guide include: